Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 194

19
FICU-1008
FICU-1008
Message
<timestamp>, [FICU-1008], <sequence-number>,, WARNING, <system-
name>, FMS mode has been enabled. Port(s):<port number(s)> have
been disabled due to port address conflict.
Probable
Indicates that the specified port(s) were disabled when FICON Management Server mode (fmsMode)
Cause was enabled. This is due to port address conflict or port address being reserved for CUP management
port
Recommended No action is required.
Action
Severity
WARNING
FICU-1009
Message
<timestamp>, [FICU-1009], <sequence-number>,, WARNING, <system-
name>, FMS Mode enable failed due to insufficient frame filtering
resources on some ports
Probable
Indicates that the frame filtering resources required to enable FICON Management Server mode
Cause (fmsMode) were not available on some of the ports.
Recommended Use the perfDelFilterMonitor command to delete the filter-based performance monitors used on all
Action ports to free up the resources.
Severity WARNING
FICU-1010
Message
<timestamp>, [FICU-1010], <sequence-number>,, WARNING, <system-
name>, FMS Mode enable failed due to address conflict with port
<port number>
Probable
Indicates that the FICON Management Server mode (fmsMode) was not enabled because the specified
Cause port which has an address conflict with the CUP management port is in use.
Recommended Use the portDisable command to disable the specified port to avoid the port address conflict.
Action
Severity WARNING
19-4 Fabric OS Message Reference
Publication Number: 53-1000242-01