Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 425

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [SEC-1117], <sequence-number>,, INFO, <system-name>,

Fail to set <data>.

Indicates that the switch failed to save the data received by the primary FCS switch. This data can be an

FCS password, a non-FCS password, SNMP data, or multiple user authentication data.

Run the secFabricShow command to verify that all switches in fabric are in the ready state. When all

switches are in the ready state, retry the operation.

<timestamp>, [SEC-1118], <sequence-number>,, INFO, <system-name>,

Fail to set SNMP string.

Indicates that the SNMP string could not be set.

Usually this problem is transient. Retry the command.

<timestamp>, [SEC-1119], <sequence-number>,, INFO, <system-name>,

Secure mode has been enabled.

Indicates that the secure Fabric OS was enabled by the secModeEnable command.

Verify that the security event was planned. If the security event was planned, there is no action required.

If the security event was not planned, take appropriate action as defined by your enterprise security

Fabric OS Message Reference

Publication Number: 53-1000242-01