Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 188

18
FCR-1065
FCR-1065
Message
<timestamp>, [FCR-1065], <sequence-number>,, ERROR, <system-name>,
Fabric on port <port number> was assigned two different fabric IDs.
Probable Indicates that another port on the switch is connected to the same edge fabric with a different fabric ID
Cause
assignment.
Recommended
Change the port fabric ID to same value as the other ports connected to the edge fabric using the
Action
portCfgExport or portCfgVexport commands.
Severity
ERROR
FCR-1066
Message
<timestamp>, [FCR-1066], <sequence-number>,, ERROR, <system-name>,
Fabric on port <port number> has same fabric ID as another fabric.
Probable
Indicates that either the fabric split, or there is another fabric (possibly the backbone) that has the same
Cause fabric ID as the fabric connected to this port.
Recommended
If the fabric split, then merge the fabrics and manually re-enable the port.
Action
If there is another fabric with the same ID, change the fabric ID for the port using the portcfgexport or
portcfgvexport commands.
Severity ERROR
FCR-1067
Message
<timestamp>, [FCR-1067], <sequence-number>,, WARNING, <system-
name>, Zone configurations, total LSAN zones and aliases, exceeded
on port <port number> by <overflow> entries; max entries: <LSAN zone
limit>.
Probable
Indicates that the total number of zone configurations created in the connected fabric exceeds the
Cause maximum number supported by the Fibre Channel.
The limit includes both active and configured information that is part of the zoning database in the edge
fabric. Non-LSAN zones are not counted in the limit.
Recommended
Limit the LSAN zoning related zone configuration in the edge fabric connected to this port.
Action
Severity
WARNING
18-20 Fabric OS Message Reference
Publication Number: 53-1000242-01