Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 237

FW-1182
Message
<timestamp>, [FW-1182], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of invalid CRCs that the port experiences has risen above the high boundary.
Cause
Recommended
This error generally indicates an deteriorating fabric hardware. Check your SFPs, cables, and
Action connections for faulty hardware. Verify that all optical hardware is clean.
Severity
WARNING
FW-1183
Message
<timestamp>, [FW-1183], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Indicates that the number of invalid CRCs that the port experiences has changed from a value outside of
Cause
the acceptable range to a value within the acceptable range.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your SFPs,
cables, and connections for faulty hardware. Verify that all optical hardware is clean.
Severity
INFO
FW-1184
Message
<timestamp>, [FW-1184], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable Indicates that the percentage of incoming traffic that the port experiences has changed.
Cause
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity
INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1182
25-31