Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 132

9
EM-1043
Severity
WARNING
EM-1043
Message
<timestamp>, [EM-1043], <sequence-number>,, WARNING, <system-name>,
Can't power <FRU Id> <state (on or off)>.
Probable
Indicates that the specified FRU cannot be powered on or off.
Cause
Recommended
The specified FRU is not responding to commands and should be replaced.
Action
Severity
WARNING
EM-1044
Message
<timestamp>, [EM-1044], <sequence-number>,, WARNING, <system-name>,
Can't power on <FRU Id>, its logical switch is shut down
Probable Indicates that the specified FRU cannot be powered on because the associated logical switch is shut
Cause
down.
Recommended Run the switchStart command on the associated logical switch.
Action
Severity WARNING
EM-1045
Message
<timestamp>, [EM-1045], <sequence-number>,, WARNING, <system-name>,
<FRU Id> is being powered <new state>
Probable Indicates that an automatic power adjustment is being made because of the (predicted) failure of a
Cause
power supply or the insertion or removal of a port blade. If new_state is On, a port blade is being
powered on because more power is available (either a power supply was inserted or a port blade was
removed or powered down). If new_state is Off, a port blade has been powered down because a power
supply has been faulted, because it is indicating a predicted failure. If new_state is Down (not enough
power), a newly inserted port blade was not powered on because there was not enough power available.
9-12 Fabric OS Message Reference
Publication Number: 53-1000242-01