Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 158
Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs
Also See for AA979A - StorageWorks SAN Switch 2/8V:
- Command reference manual (824 pages) ,
- Reference (550 pages) ,
- Administrator's manual (406 pages)
Table of Contents
Advertisement
12
FABS-1015
Probable
Indicates the specified FRU could not be enabled. This is usually an internal Fabric OS problem.
Cause
Recommended
Try removing and reinserting the FRU.
Action
Reboot or power-cycle the CP or system.
If the message persists, run the firmwareDownload command to update the firmware.
Severity
ERROR
12-6
Fabric OS Message Reference
Publication Number: 53-1000242-01
Advertisement
Table of Contents
Related Manuals for Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V
Related Products for Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V
- Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base
- Brocade Communications Systems AE370A - Brocade 4Gb SAN Switch 4/12
- Brocade Communications Systems ServerIron ADX 12.4.00
- Brocade Communications Systems ServerIron ADX 12.4.00a
- Brocade Communications Systems SERVERIRON ADX 1000
- Brocade Communications Systems SERVERIRON ADX 4000
- Brocade Communications Systems SERVERIRON ADX 10000
- Brocade Communications Systems ServerIron ADX 8000
- Brocade Communications Systems ServerIron ADX 1000F
- Brocade Communications Systems AP7420 Series
- Brocade Communications Systems AM866A - StorageWorks 8/8 Base SAN Switch
- Brocade Communications Systems SMI Agent 120.11.0
- Brocade Communications Systems Access Gateway
- Brocade Communications Systems Network Advisor SMI Agent 12.0.0
- Brocade Communications Systems 200E Series
- Brocade Communications Systems 300