Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 157

FABS-1013
Message
<timestamp>, [FABS-1013], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:Unknown blade type 0x<Blade
type>
Probable
An unrecognized type of blade has been discovered in the system.
Cause
This may be caused by an incorrect FRU header, inability to read the FRU header, or the blade may not
be supported by this platform or Fabric OS version.
Recommended
Verify that the blade is valid for use in this system and this version of Fabric OS.
Action
Try reseating the blade.
If this is a valid blade and reseating does not fix the problem, then replace the blade.
Severity
ERROR
FABS-1014
Message
<timestamp>, [FABS-1014], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:Unknown FRU type 0x<FRU Object
type>
Probable An unrecognized type of FRU has been discovered in the system.
Cause
This may be caused by an incorrect FRU header, inability to read the FRU header, or the FRU may not
be supported by this platform or Fabric OS version.
Recommended Verify that the FRU is valid for use in this system and this version of Fabric OS.
Action
Try reseating the FRU.
If this is a valid FRU and reseating doesn't help, then replace the FRU.
Severity ERROR
FABS-1015
Message
<timestamp>, [FABS-1015], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:Request to enable FRU type
0x<FRU Object type>, unit <Unit number> failed. err code <Error
code>
Fabric OS Message Reference
Publication Number: 53-1000242-01
12
FABS-1013
12-5