Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 337

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

KSWD System Messages

<timestamp>, [KSWD-1003], <sequence-number>, FFDC, WARNING,

<system-name>, kSWD: <Warning message>

Indicates a warning state within the system.

A critical application error was reported in the watchdog subsystem. Refer to the string at the end of the

error message for specific information. The switch will reboot (on single-CP switches) or failover (on

dual-CP switches).

The warning message will be any one of the following:

Probable Cause: One of the critical daemons ended unexpectedly.

<<daemon name> failed to refresh SWD*** Sending SIGABRT to pid <process id number>>

Probable Cause: One of the critical daemons is found to be nonresponsive; sending signal abort.

Run the saveCore command to find if any core files were created. If a core file is found, FTP all core

files to a secure server location.

Copy the warning message, any core file information, and contact your switch service provider.

Fabric OS Message Reference

Publication Number: 53-1000242-01