Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 363

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

Indicates that the configuration file sync.conf contains too many entries.

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [PDM-1007], <sequence-number>,, WARNING, <system-

name>, File not created: <file name>

Indicates that the PDM process failed to create the specified file name.

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [PDM-1008], <sequence-number>,, WARNING, <system-

name>, Failed to get the number of uports

Indicates that the PDM system call to getCfg failed.

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [PDM-1009], <sequence-number>,, WARNING, <system-

name>, Can't update Port Config Data

Fabric OS Message Reference

Publication Number: 53-1000242-01