Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 220

25
FW-1118
Probable
Indicates that the number of fabric reconfigures has changed. The following actions can cause a fabric
Cause
reconfiguration:
•
two switches with the same domain ID have connected to one another.
•
two fabrics have joined.
•
an E_Port has gone offline.
•
a principal link has segmented from the fabric.
Recommended Verify that the cable is properly connected at both ends. Verify that the SFPs have not become faulty. An
Action
inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting.
Severity INFO
FW-1118
Message
<timestamp>, [FW-1118], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the number of fabric reconfigures has fallen below the low boundary. The following
Cause occurrences can cause a fabric reconfiguration:
•
Two switches with the same domain ID have connected to one another.
•
Two fabrics have joined.
•
An E_Port has gone offline.
•
A principal link has segmented from the fabric.
A low number of fabric reconfigurations means that the fabric is functioning normally.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity
INFO
FW-1119
Message
<timestamp>, [FW-1119], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable Indicates that the number of fabric reconfigures has risen above the high boundary. The following
Cause occurrences can cause a fabric reconfiguration:
•
Two switches with the same domain ID have connected to one another.
•
Two fabrics have joined.
25-14 Fabric OS Message Reference
Publication Number: 53-1000242-01