Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 543

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

AUDIT SULB System Messages

AUDIT, <timestamp>, [SULB-1001], WARNING, FIRMWARE, <event-

initiator-details>, <event-location>, , Firmwaredownload command

has started.

Indicates that the firmwareDownload command has been entered. This process can take some time.

No action is required. Allow the firmwareDownload command to continue without disruption. Do not

fail over or power down the system during firmware upgrade.

Run the firmwareDownloadStatus command for more information.

AUDIT, <timestamp>, [SULB-1002], INFO, FIRMWARE, <event-initiator-

details>, <event-location>, , Firmwaredownload command has

completed successfully.

Indicates that the firmwareDownload command has completed successfully and switch firmware has

been updated.

No action is required. The firmwareDownload command has completed as expected.

Run the firmwareDownloadStatus command for more information. Run firmwareshow to verify the

firmware versions.

Fabric OS Message Reference

Publication Number: 53-1000242-01