Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 428

58
SEC-1135
SEC-1135
Message
<timestamp>, [SEC-1135], <sequence-number>,, INFO, <system-name>,
Secure fabric version stamp has been reset.
Probable Indicates that the version stamp of the secure fabric is reset.
Cause
Recommended Verify that the security event was planned. If the security event was planned, no action is required. If the
Action
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-1136
Message
<timestamp>, [SEC-1136], <sequence-number>,, ERROR, <system-name>,
Failed to verify signature <data type, MUA, policy, etc.,>.
Probable
Indicates that the receiving switch fails to validate the security database sending from the primary FCS
Cause switch. This message usually indicates that the data package is corrupted, the time stamp on the package
is out of range as a result of a replay attack or out-of-sync time service, or the signature verification
failed. Signature verification failure indicates either an internal error (such as losing the primary public
key) or an invalid database.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action in the ready state. If a switch is in the error state, the database might not be correctly updated for that
switch. This message might also be the result of an internal corruption or a hacker attack to the secure
fabric.
Severity
ERROR
SEC-1137
Message
<timestamp>, [SEC-1137], <sequence-number>,, ERROR, <system-name>,
No signature in <data type, MUA, policy, etc.,>.
Probable Indicates that the receiving switch fails to validate the security database sending from the primary FCS
Cause switch. This message usually indicates that the data package is corrupted, the time stamp on the package
is out of range as a result of a replay attack or out-of-sync time service, or the signature verification
failed. Signature verification failure indicates either an internal error (such as losing the primary public
key) or an invalid database.
58-34 Fabric OS Message Reference
Publication Number: 53-1000242-01