ZONE-1022
Message
<timestamp>, [ZONE-1022], <sequence-number>,, INFO, <system-name>,
The effective configuration has changed to <Effective configuration
name>. <AD Id>
Probable
Indicates that the effective zone configuration has changed to the name displayed.
Cause
Recommended
Verify that this zone configuration change was done on purpose. If the new effective zone configuration
Action
is correct, no action is necessary.
Severity
INFO
ZONE-1023
Message
<timestamp>, [ZONE-1023], <sequence-number>,, INFO, <system-name>,
Switch connected to port (<port number>) is busy. Retry zone merge
Probable
Indicates that the switch is retrying the merge operation. This usually occurs if the switch on the other
Cause
side of the port is busy.
Recommended
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action
supportSave command and contact your switch service provider.
Severity
INFO
ZONE-1024
Message
<timestamp>, [ZONE-1024], <sequence-number>,, INFO, <system-name>,
<Information message>
Probable
Indicates that the cfgSave command ran successfully. The <Information message> is "cfgSave
Cause
completes successfully."
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
73
ZONE-1022
73-7