Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 156

12
FABS-1010
FABS-1010
Message
<timestamp>, [FABS-1010], <sequence-number>,, WARNING, <system-
name>, <Function name>: Wrong media_event <Event number>
Probable Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS
Cause
problem or file corruption.
Recommended Reboot or power cycle the switch.
Action
If the message persists, run the firmwareDownload command to update the firmware.
Severity WARNING
FABS-1011
Message
<timestamp>, [FABS-1011], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:Invalid input state 0x<Input
state code>
Probable
An unrecognized state code was used in an internal Fabric OS message for a FRU.
Cause
Recommended
Reboot or power-cycle the CP or system.
Action
If the message persists, run the firmwareDownload command to update the firmware.
Severity
ERROR
FABS-1012
Message
<timestamp>, [FABS-1012], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:FRU state transition failed.
Current state 0x<Current state of FRU> Requested state 0x<Requested
new state of FRU> err 0x<Error code>
Probable A FRU could not be transitioned to the requested state. This is usually an internal Fabric OS problem.
Cause
Recommended Reboot or power-cycle the CP or system.
Action
If the message persists, run the firmwareDownload command to update the firmware.
Severity ERROR
12-4 Fabric OS Message Reference
Publication Number: 53-1000242-01