Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 547

Status Message
"The secondary partition has been restored successfully."
"Firmware is being downloaded to the blade. This step may take up to 10
minutes."
"firmwareDownload timed out."
"Reboot occurred during firmwareDownload. firmwareCommit will be started
to recover the blade."
"Blade rebooted during firmwareCommit. The operation will be restarted."
"Firmware has been downloaded successfully. Blade is rebooting with the new
firmware."
"Blade has rebooted successfully."
"New firmware failed to boot up. Please retry firmwareDownload."
"firmwareCommit has started on the blade. This may take up to 10 minutes."
"firmwareRestore is entered. System will reboot and a firmwareCommit
operation will start upon boot up."
"Switch is relocating the AP image."
"The AP image is relocated successfully."
"Switch reboots during relocating the AP image. The operation will be restarted." 0xab
"Blade failed to reboot with the original image. firmwareRestore command
failed."
Fabric OS Message Reference
Publication Number: 53-1000242-01
79
SULB-1009
Status Code
0x95
0xa0
0xa1
0xa2
0xa3
0xa4
0xa5
0xa6
0xa7
0xa8
0xa9
0xaa
0xac
79-5