Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 404

58
SEC-1041
SEC-1041
Message
<timestamp>, [SEC-1041], <sequence-number>,, ERROR, <system-name>,
Invalid port member <port member> in portlist (<port list>).
<Reason>.
Probable
Indicates that the port member is invalid for one of the following reasons:
Cause
•
The value is not a number.
•
The value is too long. Valid numbers must be between one and three characters long.
•
The value cannot be parsed due to invalid characters.
Recommended
Use valid syntax when entering port members.
Action
Severity
ERROR
SEC-1042
Message
<timestamp>, [SEC-1042], <sequence-number>,, ERROR, <system-name>,
Invalid index/area member <port member> in portlist (<Port list>).
Out of range (<Minimum value> - <Maximum value>).
Probable Indicates that the specified index or area member is not within the minimum and maximum range.
Cause
Recommended Use valid syntax when entering index or area numbers.
Action
Severity
ERROR
SEC-1043
Message
<timestamp>, [SEC-1043], <sequence-number>,, ERROR, <system-name>,
Invalid port range <Minimum> - <Maximum>.
Probable
Indicates that the specified port is not within the minimum and maximum range.
Cause
Recommended
Use valid syntax when entering port ranges.
Action
Severity
ERROR
58-10 Fabric OS Message Reference
Publication Number: 53-1000242-01