Table of Contents
Advertisement
Chapter 1 Optical Spectrum Measurement
Safety information
CAUTION
WARNING
Optical
surfaces
Ventilation
Battery
operation
8
Safety instructions for class 1 laser products
Invisible laser radiation
Class 1 laser products are defined as safe in normal operation under
reasonably foreseeable conditions.
Although the laser radiation from a class 1 laser product will not
harm eyes or skin, follow the general laser safety instructions (see
General laser safety instructions) to ensure maximum safety
when working with laser sources.
Safety instructions for class 1M laser products
Invisible laser radiation
Viewing the laser output of a class 1M laser product with certain
optical instruments (for example eye loupes, magnifiers,
microscopes) within a distance of 100 mm may pose an eye hazard.
Do not expose eyes to the beam within a distance of 100 mm.
Do not view the laser output with optical instruments.
Follow the general laser safety instructions.
Dust and fingerprints can damage optical surfaces, particularly when
such surfaces are pressed together. To protect the instrument and
cables, every cable should be cleaned before it is connected to the
instrument. The optical connectors on the instrument should also be
cleaned regularly.
–
Before cleaning the optical surfaces please pay attention to the
notes on safe handling of fiber optical cables and optical
connectors.
–
To clean the optical connectors, remove the test adapters, dab the
end surfaces of the plug pins with cleaning tape and blow out the
test adapter using compressed air.
–
Always fit protective caps to optical connectors that are not in use.
Please refer to the user manual of the MTS-5800 Base Unit for further
information.
Please refer to the user manual of the MTS-5800 Base Unit for further
information.
MTS / T-BERD 5800 • COSA-4055 • User Manual 2016.01
Advertisement
Table of Contents
