Table of Contents
Advertisement
BIOS Setup
The mA-3011 BIOS settings have been set to values which allow the mA-3011 to operate
at optimal performance levels. Users should not change BIOS settings unless instructed
to do so by VIAVI Customer Service. Making changes to mA-3011 BIOS settings may
place the mA-3011, Chassis and other System components in an inoperable or
unresponsive state. VIAVI assumes no responsibility for warranty repairs related to
damages and or performance issues on devices on which BIOS settings have been
changed by the end user.
Accessing mA-3011 Module Information
Module information and operational status can be accessed using the mA-3011 Web UI,
the Chassis Web UI, or external application tools such as National Instrument's
LabVIEW™.
Recommended Browsers
Recommended browsers for viewing CMP AXIe Web Browser User Interfaces:
•
Google Chrome Version 53.0.2785.116 m (64-bit) or later
•
Firefox Version 48.0.1 or later
•
Internet Explorer 11 or later
mA-3011 Web Browser UI
The mA-3011 Web Browser User Interface (Web UI) is a basic interface that displays
module information, module operational status and provides user's with the ability to
update the module's operating system.
Accessing the mA-3011 Web Browser UI requires the user to identify the mA-3011's IP
Address. The module's IP is displayed on the Chassis Web Browser UI. Refer to the
mA-1302/mA-1305 AXIe Chassis Operation Manual for information about accessing
Chassis module information.
Chassis Web Browser UI
The Chassis Web Browser UI provides access to mA-3011 information and readings.
When the mA-3011 is installed in a CMP AXIe Chassis, the Chassis Web Browser UI also
provides users with the ability to update the module's operating system. Refer to the
mA-1302/mA-1305 AXIe Chassis Operation Manual for instructions to access the Chassis
Web Browser UI.
Rev. C0
April 2020
mA-3011 AXIe Embedded Host Module Operation Guide
Chapter 4 Operation and Control
BIOS Setup
Page 4-3
Advertisement
Table of Contents
