Figure 3
5 different types of adapters may be mounted on the universal connector
FC Adapter (EUFCAD)
Switching adapter type
In order to switch from an adapter to another, proceed as shown.
Figure 4
Removing and refitting an adapter
Cleaning the universal connector
Remove the adapter in order to access the ferrule and clean it using a cotton swab.
DIN Adapter (EUDINAD)
Pull out in the direction of the
arrow in order to release the
adapter from the lug holes
User Manual
Optical connectors and interchangeable adapters
ST Adapter (EUSTAD)
700MAN902 Rev. 000
Chapter 1 Getting started
SC Adapter (EUSCAD)
To place an adapter, position
the handle as shown in order
to engage with the the lugs,
push hard and pull the
handle down
5