Table of Contents
Advertisement
Chapter 2 Using Spectrum Analyzer
Setting trace
Setting trace
The Spectrum Analyzer module provides display of up to 6 traces. Each trace consists
of a series of points where amplitude data is stored. The module updates the informa-
tion for any active trace with each sweep.
Table 9
Table 9
Parameter
Select Trace
Trace View
On/Off
Trace Type
Trace Hold Time
Select Trace Info
Detectors
Trace Clear All
T1-T2 → T5
T2-T1 → T5
Trace type
The following Trace Types are available:
•
Clear Write: Clears current data and display with new measurements. Once
selected, the Trace Legend, W is indicated on the Quick Access and display tab
for Trace.
Page 16
describes the functions.
Trace functions
Definition
Tap to select trace from the following options: Trace 1, Trace
2, Trace 3
Access: Menu > Trace > Select Trace
Select the Trace View to On or Off. Once you have selected
On, you can see the selected trace with its dedicated color on
the chart. When Off, the Trace Legend is indicated on the
Quick Access and display tab for Trace.
Access: Menu > Trace > Trace View On/Off
Tap to select the Trace Type from the following options: Clear
Write, Capture, Max, Min, or Load. For details, see
type" on page
Access: Menu > Trace > Trace Type
Tap to set the Trace hold Time using the on-screen keyboard.
Access: Menu > Trace > Trace Hold Time
Tap to select the trace information from the following options:
None, Trace 1, Trace 2, Trace 3, Trace 4, Trace 5, or Trace
6.
Access: Menu > Trace > Select Trace Info
Tap to select the detection mode from the following options:
Normal, Peak, RMS, Negative Peak, or Sample. See
"Trace type" on page 16
Access: Menu > Trace > Detectors
Tap to remove all the traces and initialize the trace settings.
Access: Menu > Trace > Trace Clear All
If Trace 1 and Trace 2 are active, this menu is activated.
If Trace 1 and Trace 2 are active, this menu is activated.
SPA06MA-O User's Guide
16.
for more information.
22145360, R005
"Trace
April 2021
Advertisement
Table of Contents
