07/11/02 09:04:59 61TA0000_110_0127
25. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0335 indicated?
YES
−
Check for poor connections or loose
terminals at the CKP sensor and the ECM/PCM,
then go to step 1.
−
NO
Troubleshooting is complete. If any other
Temporary DTCs or DTCs are indicated, go to the
indicated DTC's troubleshooting.
26. Reconnect all connectors.
27. Update the ECM/PCM if it does not have the latest
software (see page 11-6), or substitute a known-
good ECM/PCM (see page 11-7).
28. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0335 indicated?
YES
−
Check for poor connections or loose
terminals at the CKP sensor and the ECM/PCM. If
the ECM/PCM was updated, substitute a known-
good ECM/PCM (see page 11-7), then recheck. If the
ECM/PCM was substituted, go to step 1.
NO
−
If the ECM/PCM was updated, troubleshooting
is complete. If the ECM/PCM was substituted,
replace the original ECM/PCM (see page 11-232). If
any other Temporary DTCs or DTCs are indicated,
go to the indicated DTC's troubleshooting.
11-127