Honda Accord 2008 Manual page 435

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:04:07 61TA0000_110_0116

PGM-FI System

DTC Troubleshooting (cont'd)

30. Test-drive the vehicle for several minutes in the

range of these recorded freeze data parameters:

• ENGINE SPEED

• REL TP SENSOR

• CLV (calculated load value)

• APP SENSOR

31. Check for Temporary DTCs or DTCs with the HDS.

Is DT C P0300, P0301, P0302, P0303, or P0304

Check for poor connections or loose

terminals at the ignition coils, the injectors, and the

ECM/PCM, then go to the troubleshooting for DTC

P0301, P0302, P0303, or P0304 (see page 11-117).

Go to step 32.

32. Monitor the OBD STATUS for DTC P0301, P0302,

P0303, or P0304 in the DTCs MENU with the HDS.

Does the screen indicate PASSED?

Troubleshooting is complete. If any other

Temporary DTCs or DTCs were indicated in step 31,

go to the indicated DTC's troubleshooting.

If the screen indicates FAILED, go to step 1

and recheck. If the screen indicates EXECUTING,

keep driving until a result comes on. If the screen

indicates OUT OF CONDITION or NOT COMPLETED,

go to step 30.

Chapters

Table of Contents