07/11/02 09:04:08 61TA0000_110_0119
25. Do an engine compression and a cylinder leakdown
test (see page 6-6).
Did the engine pass both tests?
YES
−
Go to step 26.
NO
−
Repair the engine, then go to step 40.
26. Do the VTEC rocker arm test (see page 6-7).
Did the engine pass the test?
YES
−
Go to step 27.
−
NO
Repair the VTEC rocker arm (see page 6-34),
then go to step 40.
27. Turn the ignition switch to LOCK (0).
28. Jump the SCS line with the HDS.
29. Disconnect ECM/PCM connector C (49P).
30. Turn the ignition switch to ON (II).
31. Measure voltage between body ground and the
appropriate ECM/PCM connector terminal of the
problem cylinder (see table).
PROBLEM
DTC
ECM/PCM
CYLINDER
TERMINAL
No. 1
P0301
C5
No. 2
P0302
C6
No. 3
P0303
C7
No. 4
P0304
C8
ECM/PCM CONNECTOR C (49P)
INJ2 (RED)
INJ1 (BRN)
Terminal side of female terminals
Is there battery voltage?
YES
−
Go to step 39.
NO
−
Go to step 32.
WIRE
COLOR
BRN
RED
BLU
YEL
INJ3 (BLU)
INJ4 (YEL)
(cont'd)
11-119
*01