Functionaldescription - Mitel SX-200 Practices

m .
SUERSET3DN
Telephone
Functional Description
Fixed Function Keys
6.3 Surrounding the dial pad are ten fixed function keys; their functions .are as follows:
HOLD Key:
Pressing the red HOLD key places the current call on hard hold. The call
may be retrieved by pressing the appropriate line select key.
VOLUME UP and DOWN Keys:
These keys are used to set levels for: ringing volume,
ringing pitch, handsfree volume, and background music volume. Each .key depression
changes the volume level or pitch by one step. The level for each function is stored in
the PABX, changing one function setting does not affect the others. On system or set
resets, the levels are restored. Default levels are applied when the set is first
programmed.
0 When the set is ringing, these keys control the ringing volume level,
l
When the set is in handsfree mode, these keys control the speaker volume level.
l
When ringing from the tone demonstration package has been accessed, these
keys control the ringer pitch.
l
When background music is connected, these keys control the music volume level.
SPEAKER Key:
The SPEAKER key controls handsfree operation of the set. Pressing
this key once switches the speaker ON and selects the prime line. Calls can be
originated and/or received handsfree. Successive operation of this key toggles the set
between ON/OFF hook states.
MUTE Key:
The MUTE key, to the right of the volume keys, is used to disable the
microphone (when in Handsfree mode) so that conversation near the set is not picked
up and heard by the distant party. The microphone is disabled only while the key is
pressed. In Generic 1004 and above, this key toggles instead.
PROGRAM Key:
The PROGRAM key is used to program speed dial numbers for line
keys not used for line appearances or features. When programming is finished, this key
is pressed to save the entered number.
CANCEL Key:
This key is used to cancel a dialing sequence, to terminate a call in
progress, to terminate (without saving) a programming function, or to return to a party
held on soft hold.
TRANS/CONF Key:
Pressing this key places the current call on hold and returns dial
tone. The user dials another number. Hanging up at this point transfers the held party
to the dialed number. Pressing the TRANS/CONF key again when the called party
answers reconnects the held party, forming a conference.
REDIAL Key:
This key allows single keystroke redialing of the last correct internal or
external number entered from this set. This key can be used only if manual dialing has
not been initiated.
MESSAGE Key and LED:
The MESSAGE LED flashes whenever a message is
waiting for this set. Pressing this key calls the set that left the message.
9109-096-126-NA Issue 1 Revision 0 126 6-5