Physical Description; General; Handset,Speakerandmicrophone; Lineappearancekeys - Mitel SX-200 Practices

Peribheral Devices
Physical Description
General
6.2
The SWB?SR3 DN telephone dimensions are:
length 240
mm (9.45 in,)
width
155
mm (6.10 in,)
height 106
mm (4.17 in,),
The faceplate of the telephone is divided into four functional areas:
l
handset, speaker and microphone
l
line appearance keys, each with a status indicator
l
fixed function keys
l
telephone keypad
Handset, Speaker and Microphone
The handset mounts in a cradle on the left side of the telephone; the speaker is located
beneath a grille between the cradle depressions. The microphone is located in the
bottom edge of the telephone, below the depression where the handset mouthpiece
rests.
Line Appearance Keys
There is a column of 12 keys in the upper right part of the telephone's faceplate. These
keys may be programmed as Speed Dial numbers, to access specific lines, orto access
specific features. To the left of each line appearance key is a liquid crystal display (LCD)
indicator, which defines the status of each line appearance.
Fiied Function Keys
The fixed function keys are arranged around the telephone keypad, except for the red
Hold key which is at the bottom of the column of line appearance keys.
e
Telephone Keypad
'The telephone keypad has 12 keys arranged in the standard pattern. The number keys
have associated letters with a slight deviation from the standard: the letter "q" appears
with "p", Y' and 'Is" on the 7 key; "2" appears with "w", "x" and "y" on the 9 key,
Message Waiting Lamp
The message waiting lamp is a LED immediately below the Message function key at
the bottom of the faceplate.
126 6-4
Revision 0
9109-096-126-NA Issue1