Universal Card; Physical Description; Brief Description; Electrical Description - Mitel SX-200 Practices

7
.
UNIVERSAL CARD
Brief Description
7.1-
The Universal Card interfaces up to four modules to the backplane in any of the
digital peripheral bays. The card and four available modules are illustrated in
Figure 7-1, and described following.
i
Facilities
7.2
Facilities provided by the Universal Card include:
l
module mounting positions (four)
9 module activity LEDs (four)
9 software+zontrolled failure alarm LED.
Physical Description
7.3 Each module has two vertical 32-pin female DIN connectors which mate to male
connectors on the Universal card. Mechanical connection to the Universal Card is
assisted by a standoff.
Up to four modules may be mounted on a Universal Card, subject to electrical power
limitations. See the Electrical Description paragraph.
Module size is 145 mm x 83 mm (5.7 in. x 3.25 in.).
Electrical Description
7.4
The combination of modules on a Universal Card is limited by the power available
from the card. Each module has a power rating number. The total of these numbers
must not exceed IO. The Universal Card can be mounted only in a high power
(upper) card slot of a digital bay.
9109-096-l 25-NA
Issue 1 Revision 0 125 7-l