Toyota Tundra 2005 Service - Repair - Maintenance page 3459

AC-94
Connector "A"
A11
A12
Connector "A"
A17
OFF ON
A1
A4
AIR CONDITIONING
(c)
A1
If operation is not as specified, replace the integration circuit.
A10
I12236
7.
(a)
(b)
A10
If operation is not as specified, replace the integration circuit.
I27865
8.
OFF
ON
Illumination circuit
If operation is not as specified, replace the integration circuit
bulb
B13
I11195
- AIR CONDITIONING CONTROL ASSEMBLY (Center
Cluster Integration)
Connect the positive (+) lead from the battery to terminal
A11 and the negative (-) lead to terminal A10, then check
that the indicator dims.
Double cab:
INSPECT A/C INDICATOR OPERATION
Connect the positive (+) lead from the battery to terminal
A17 and the negative (-) lead to terminal A10.
Push the A/C button in and check that the A/C indicator
lights up.
Access cab, Standard cab:
INSPECT AIR INLET CONTROL SWITCH CONTINUITY
Switch condition Tester connection
Author :
Specified condition
B13 - A1 No continuity
B13 - A1 Continuity
A4 - B13 Continuity
Date :
5121