AC-92
A8
AIR CONDITIONING
INSPECTION
1.
Connect the positive (+) lead from the battery to terminal B7 and
the negative (-) lead to terminal A8 then check that the illumina-
tions lights up.
If operation is not as specified, check the faulty bulb.
: Bulb
B7
I11193
2.
Connect the positive (+) lead from the battery to terminal B2 and
the negative (-) lead to terminal B11 then check that the illu-
minations lights up.
If operation is not as specified, check the faulty bulb.
: Bulb
B2
B11
I27863
3.
Set the tester as shown in the illustration to check for continuity.
If continuity exists, replace the heater control.
If no continuity exists, replace the bulb.
I07872
-
AIR CONDITIONING CONTROL ASSEMBLY (Center
Cluster Integration)
Access cab, Standard cab:
INSPECT ILLUMINATION OPERATION
Double cab:
INSPECT ILLUMINATION OPERATION
INSPECT BULB
Author :
AC3S3-02
Date :
5119