Toyota Tundra 2005 Service - Repair - Maintenance page 3460

OFF ON
A10
A14
Connector "A"
A4
Connector "A"
A4
A11
Connector "A"
A14
AIR CONDITIONING
9. Double cab:
INSPECT AIR INLET CONTROL SWITCH CONTINUITY
Switch condition
OFF
ON
Illumination circuit
If operation is not as specified, replace the integration circuit
bulb
B8
I27866
10. Access cab, Standard cab:
A1
INSPECT AIR INLET INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
A4 and the negative (-) lead to terminal A1.
(b) Push the air inlet button in and check that the air inlet indi-
cator lights up.
If operation is not as specified, replace the integration circuit.
I12237
(c) Connect the positive (+) lead from the battery to terminal
A1
A11 and the negative (-) lead to terminal A10, then check
that the indicator dims.
If operation is not as specified, replace the integration circuit.
A10
I12238
11. Double cab:
INSPECT AIR INLET INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
A14 and the negative (-) lead to A10.
(b) Push the air inlet button in and check that the air inlet indi-
cator lights up.
A10
If operation is not as specified, replace the integration circuit.
I27867
- AIR CONDITIONING CONTROL ASSEMBLY (Center
Cluster Integration)
Tester connection
B8 - A10
B8 - A10
A14 - B8
Author :
AC-95
Specified condition
No continuity
Continuity
Continuity
Date :
5122