Toyota Celica 2005 Repair Manual page 1235

DI−1034
INSPECTION PROCEDURE
If the DTC is not displayed, do the following troubleshooting.
1 Does SRS warning light light up for approx. 6 seconds?
LOCK
AB0117 AB0119
H11997
YES
2 Check voltage between terminal TC and CG of DLC3.
ON
(−)
AB0119
H10688
NG
2005 CELICA (RM1131U)
DIAGNOSTICS
CHECK:
Check operation of the SRS warning light after ignition switch
ON
is turned from LOCK position to ON position.
H12917
PREPARATION:
Turn the ignition switch to ON.
CHECK:
CG
Measure the voltage between terminal TC and CG of DLC3.
OK:
TC
(+)
H10654
− SUPPLEMENTAL RESTRAINT SYSTEM
NO Check SRS warning light system (See page
DI−1028).
Voltage: 10 − 14 V
OK Go to step 4.
1234