Toyota Celica 2005 Repair Manual page 1237

DI−1036
If the DTC is displayed without a DTC check procedure, perform the following
troubleshooting.
1 Check resistance between terminal Tc of airbag sensor assembly and body
ground.
Airbag Sensor Assembly
LOCK
(+)
(−)
AB0119
H01304
OK
Replace airbag sensor assembly.
2005 CELICA (RM1131U)
DIAGNOSTICS − SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect the negative (−) terminal cable from the bat-
tery, and wait at least for 90 seconds.
(c) Disconnect the airbag sensor assembly connector.
TC
CHECK:
Check resistance between terminal TC of the airbag sensor as-
sembly connector and the body ground.
OK:
H01305
Resistance: 1 MΩ or Higher
NG Repair or replace harness or connector.
1236