Toyota Celica 2005 Repair Manual page 1227

DI−1026
INSPECTION PROCEDURE
1 Prepare for inspection.
LOCK
P/T Squib LH
Side Airbag
Sensor LH
Side Squib LH
Door Side
Airbag
Sensor LH
Front Airbag
Sensor RH
Spiral
Cable
D Squib
P Squib
Front Airbag
Sensor LH
Door Side
Airbag
Sensor RH
P/T Squib RH
Side Airbag
Sensor RH
Side Squib RH
AB0117
H12015
2005 CELICA (RM1131U)
DIAGNOSTICS
PREPARATION:
(a) Disconnect negative (−) terminal cable from the battery,
and wait at least for 90 seconds.
(b) Remove the steering wheel pad (See page SR−13).
Airbag
Sensor
(c) Disconnect the connector of the front passenger airbag
Assembly
assembly (See page RS−27).
(d) Disconnect the connector of the side airbag assembly RH
and LH (See page RS−40).
(e) Disconnect the connector of the seat belt pretensioner
RH and LH (See page BO−109).
(f) Disconnect the connectors of the airbag sensor assembly
(See page RS−53).
(g) Disconnect the connector of the front airbag sensor RH
and LH (See page RS−58).
(h) Disconnect the connector of the side airbag sensor as-
sembly RH and LH (See page RS−63).
(i) Disconnect the connector of the door side airbag sensor
RH and LH (See page RS−68).
CAUTION:
Store the steering wheel pad, front passenger airbag as-
sembly and side airbag assembly with the front surface
facing upward.
H12943
1226
− SUPPLEMENTAL RESTRAINT SYSTEM