Toyota Celica 2005 Repair Manual page 1184

INSPECTION PROCEDURE
1 Is DTC B1140/32 output?
DLC3
CG
TC
AB0119
H10600 H09528
YES
2 Is connector of side airbag sensor assembly RH properly connected?
YES
3 Prepare for inspection (See step 1 on DI−1025).
2005 CELICA (RM1131U)
DIAGNOSTICS
ON
DTC B1140/32
H12032
− SUPPLEMENTAL RESTRAINT SYSTEM
CHECK:
(a) Turn the ignition switch to ON, and wait at least for 10 se-
conds.
(b) Clear the DTC stored in memory (See page DI−884).
(c) Turn the ignition switch to LOCK, and wait at least for 10
seconds.
(d) Turn the ignition switch to ON, and wait at least for 10 se-
conds.
(e) Check the DTC (See page DI−884).
OK:
DTC B1140/32 is output.
HINT:
Codes other than code B1140/32 may be output at this time, but
they are not relevant to this check.
NO The malfunctioning part can now be considered
normal. To make sure of this, use the simulation
method to check.
NO Connect connector.
1183
DI−983