Toyota Celica 2005 Repair Manual page 1190

INSPECTION PROCEDURE
1 Is DTC B1141/33 output?
ON
DLC3
CG
TC
AB0119
H10600 H09530
YES
2 Is connector of side airbag sensor assembly LH properly connected?
YES
3 Prepare for inspection (See step 1 on page DI−1025).
2005 CELICA (RM1131U)
DIAGNOSTICS
CHECK:
(a)
(b)
(c)
(d)
DTC B1141/33
(e)
OK:
HINT:
Codes other than code B1141/33 may be output at this time, but
they are not relevant to this check.
H12034
NO
NO
− SUPPLEMENTAL RESTRAINT SYSTEM
Turn the ignition switch to ON, and wait at least for 10 se-
conds.
Clear the DTC stored in memory (See page DI−884).
Turn the ignition switch to LOCK, and wait at least for 10
seconds.
Turn the ignition switch to ON, and wait at least for 10 se-
conds.
Check the DTC (See page DI−884).
DTC B1141/33 is output.
The malfunctioning part can now be considered
normal. To make sure of this, use the simulation
method to check.
Connect connector.
1189
DI−989