Debug Lldp Interface - Dell PowerEdge M I/O Aggregator Reference Manual

Parameters
Defaults
Command Modes
Command
History

debug lldp interface

Syntax
Parameters
Defaults
Command Modes
Command
History
190 | Link Layer Discovery Protocol (LLDP)
interface
Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
none
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Enable LLDP debugging to display timer events, neighbor additions or deletions, and other
information about incoming and outgoing packets.
debug lldp interface { interface
To disable debugging, use the
detail } { tx | rx | both }} command.
interface Enter the following keywords and slot/port or number information:
•
all
(OPTIONAL) Enter the keyword
events
(OPTIONAL) Enter the keyword
events.
packet
(OPTIONAL) Enter the keyword
coming in or going out.
brief
(OPTIONAL) Enter the keyword
detail
(OPTIONAL) Enter the keyword
tx
(OPTIONAL) Enter the keyword
rx
(OPTIONAL) Enter the keyword
both
(OPTIONAL) Enter the keyword
information.
none
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
| all }{ events | packet { brief
no debug lldp interface {
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
all
events
packet
brief
detail
tx
rx
both
tenGigabitEthernet
| detail } { tx | rx | both }}
interface | all }{ events } { packet
tenGigabitEthernet
to display information on all interfaces.
to display major events such as timer
to display information regarding packets
to display brief packet information.
to display detailed packet information.
to display transmit only packet information.
to display receive only packet information
to display both receive and transmit packet
{ brief |