Clear Lldp Neighbors; Debug Lldp Interface - Dell Force10 S4810P Reference Manual

Version 7.6.1.0
Version 7.4.1.0

clear lldp neighbors

Clear LLDP neighbor information for all interfaces or a specific interfaces.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear lldp neighbors {interface}
Parameters
interface
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0

debug lldp interface

Enable LLDP debugging to display timer events, neighbor additions or deletions, and other information about incoming
and outgoing packets.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug lldp interface {interface | all}{events | packet {brief |
detail} {tx | rx | both}}
To disable debugging, use the no debug lldp interface {interface | all}
{events} {packet {brief | detail} {tx | rx | both}} command.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/ port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1071