Clear Lldp Neighbors; Debug Lldp Interface - Dell S4810 Reference Manual

clear lldp neighbors

Clear LLDP neighbor information for all interfaces or a specific interface.
S4810
Syntax
clear lldp neighbors {interface}
Parameters
interface
Defaults none
Command EXEC Privilege
Modes
Command
Version 9.0.2.0
History
Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0

debug lldp interface

To display timer events, neighbor additions or deletions, and other information about incoming and
outgoing packets, enable LLDP debugging.
S4810
Syntax
debug lldp interface {interface | all}{events | packet {brief |
detail} {tx | rx | both}}
1082
Enter the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet then the slot/ port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/ port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Link Layer Discovery Protocol (LLDP)