Show Mac-Address-Table - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.5.1.0
8.3.7.0
7.5.1.0
6.2.1.1
Example
Dell# show cam mac linecard 1 port-set 0
PVlanId
1
0
1
1
1
0
1
1

show mac-address-table

Display the MAC address table.
Z9500
Syntax
show mac-address-table [address mac-address | interface
interface | vlan vlan-id] [aging-time] [dynamic | static]
[count [vlan vlan-id] [interface interface-type [slot [/
port]]]]
Parameters
address mac-
address
dynamic
static
aging-time
1148
Description
Introduced on the Z9500.
Introduced on the S4820T.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the C-Series.
Introduced on the E-Series.
Mac Address
00:01:02:03:04:09
74:86:7a:ff:6f:1c
00:11:22:33:44:55
00:01:02:03:04:07
00:01:02:03:04:08
ff:ff:ff:ff:ff:ff
00:01:02:03:04:05
00:01:02:03:04:06
(OPTIONAL) Enter the keyword address then a MAC
address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
(OPTIONAL) Enter the keyword dynamic to display only
those MAC addresses the switch dynamically learns.
Optionally, you can also add one of these combinations:
address/mac-address, interface/interface, or vlan
vlan-id.
(OPTIONAL) Enter the keyword static to display only those
MAC addresses specifically configured on the switch.
Optionally, you can also add one of these combinations:
address/mac-address, interface/interface, or vlan
vlan-id.
Enter the keyword aging-time to display only aging-time
information.
Region Interface
DYNAMIC Fo 2/0
LOCAL_DA 00001
STATIC Fo 2/8
DYNAMIC Fo 2/0
DYNAMIC Fo 2/0
STATIC 00001
DYNAMIC Fo 2/0
DYNAMIC Fo 2/0
Layer 2