Show Interface Pfc Statistics - Dell Z9500 Command Reference Manual

show interface pfc statistics

Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
Syntax
show interface port-type slot/port pfc statistics
Parameters
port-type
slot/port
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Example
Dell (conf-if-te-0/1)#show int te 0/1 pfc statistics
(Summary)
Interface TenGigabitEthernet 0/1
Priority
Frames
---------------------------------------------------------------
-----------------------
-
0
0
1
0
2
0
3
0
4
0
5
0
6
0
7
0
Data Center Bridging (DCB)
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
0 Input TLV pkts, 1 Output TLV pkts, 0 Error pkts,
0 Pause Tx pkts, 0 Pause Rx pkts
Enter the port type.
Enter the slot/port number.
Description
Introduced on the Z9500.
Tx Total Frames
Rx XOFF Frames
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Rx Total
613