Show Chassis Hardware - Dell PowerConnect J-EX4200-24T Software Manual

show chassis hardware

Syntax
Syntax (J-EX4200
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show chassis hardware
<clei-models>
<detail | extensive>
<models>
show chassis hardware
<detail | extensive>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display a list of all Flexible PIC Concentrators (FPCs) and PICs installed in the router or
switch chassis, including the hardware version level and serial number.
In J-EX Series switch command output, FPC refers to the following:
On J-EX4200 standalone switches—Refers to the switch;
On J-EX4200 switches in a Virtual Chassis configuration—Refers to the member of a
Virtual Chassis; FPC
number
On J-EX8208 and J-EX8216 switches—Refers to a line card; FPC
slot number for the line card.
—Display information about hardware.
none
clei-models —(Optional) Display Common Language Equipment Identifier (CLEI) bar
code and model number for orderable field-replaceable units (FRUs).
—(Optional) Include RAM and disk information in output.
detail
extensive —(Optional) Display ID EEPROM information.
—(Optional) Display model numbers and part numbers for orderable FRUs and,
models
for components that use ID EEPROM format v2, the CLEI code.
view
show chassis hardware (J-EX8216 Switch) on page 644
show chassis hardware clei-models (J-EX8216 Switch) on page 645
Table 89 on page 644 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 42: Operational Mode Commands for System Monitoring
equals the member ID, from 0 through 9.
show chassis hardware
is always 0.
fpc-number
equals the
number
command.
643