Service-Policy Rate-Limit-Protocols - Dell S4810 Reference Manual

Defaults Not configured.
Command CONTROL-PLANE-CPUQOS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Usage
Create a policy-map by associating a queue number with the qos-policy.
Information
Create QoS policies prior to enabling this command.
For CoPP, use the keyword cpu-qos when creating qos-policy-input.
Related
qos-policy-input
Commands
policy-map-input

service-policy rate-limit-protocols

Apply a policy for the system to rate limit control protocols on a per-protocol basis.
S4810
Syntax
service-policy rate-limit-protocols policy-name
Parameters
policy-name
Defaults Not configured.
Command CONTROL-PLANE-CPUQOS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
508
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— creates a QoS input policy map.
— creates an input policy map.
Enter the service-policy name, using a string up to 32
characters.
Control Plane Policing (CoPP)