Defaults
Not configured.
Command
CONTROL-PLANE-CPUQOS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Usage
Create a policy-map by associating a queue number with the qos-policy.
Information
Create QoS policies prior to enabling this command.
For CoPP, use the keyword cpu-qos when creating qos-policy-input.
Related
qos-policy-input
Commands
policy-map-input
service-policy rate-limit-protocols
Apply a policy for the system to rate limit control protocols on a per-protocol basis.
S6000
Syntax
service-policy rate-limit-protocols policy-name
Parameters
policy-name
Defaults
Not configured.
Command
CONTROL-PLANE-CPUQOS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control Plane Policing (CoPP)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— creates a QoS input policy map.
— creates an input policy map.
Enter the service-policy name, using a string up to 32
characters.
445