Show Ip Bgp Filter-List - Dell Z9500 Reference Manual

Version
8.3.7.0
7.8.1.0
7.7.1.0
Usage
To view the total number of COMMUNITY attributes found, use the show ip bgp
Information
summary command. The text line above the route table states the number of
COMMUNITY attributes found.
The show ip bgp community command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the show ip bgp command output.
Example
Dell#show run extcommunity-list
!
ip extcommunity-list ecl1
permit rt 100:4
permit soo 40:4
Dell#show ip bgp extcommunity-list ecl1
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed
Origin codes: i - IGP, e - EGP, ? - incomplete
Weight Path
*>
172.16.0.2
*>
172.16.0.2
Dell#show ip bgp extcommunity-list ec
% Error: Extended community list does not exist.
Dell#

show ip bgp filter-list

View the routes that match the filter lists.
Z9500
Syntax
show ip bgp [ipv4 unicast] filter-list as-path-name
Parameters
ipv4 unicast
as-path-name
Border Gateway Protocol
Description
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
n - network,
Network
55.0.0.0/24
77.0.0.0/24
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
Enter an AS-PATH access list name. The range is 140
characters.
D - denied, S - stale
Next Hop Metric LocPrf
0 200 i
0 200 i
437