Removing The Pressure Roller And Pressure Roller Bearing - Canon imageRUNNER ADVANCE C5255 Series Service Manual

4
Parts Replacement and Cleaning > Fixing System > Removing the Pressure Roller and Pressure Roller Bearing > Procedure
3) Remove the Shutter Unit.
• 4 screws
x4
4) Clean the Shutter Cover with lint-free paper moistened with alcohol.
4 Parts Replacement and Cleaning > Fixing System > Removing the Pressure Roller and Pressure Roller Bearing > Procedure
■ Preparations
1) Open the Right Lower Cover and Right Upper Cover.(Refer to page 4-175)
2) Remove the Fixing Unit.(Refer to page 4-167)
3) Remove the Film Unit.(Refer to page 4-169)
■ Procedure
F-4-308
1) Remove the Fixing Inlet Guide.
• 1 screw
• 3 hooks
F-4-309
Removing the Pressure Roller and Pressure Roller
Bearing
NOTE:
When installing/removing it, do not touch the Pressure Roller.
Hook
CAUTION:
At installation, install it after fitting the 3 hooks to the notches.
4-173
Hooks
Fixing inlet guide
F-4-310
4-173