Function Expansion System Options; Required Options And Conditions - Canon imageRUNNER ADVANCE 6075 Series Service Manual

1
Product Overview > Product Lineup > Function Expansion System Options > Required Options and Conditions

Function Expansion System Options

■ Required Options and Conditions

Handset-G2
Card Reader-C1/F1
Copy Card Reader Attachment-A2
Voice
Guidance
Unit
Voice Guidance Kit-F1/F2
2.5inch/80GB HDD-C1
2.5inch/250GB HDD-D1
Removable
HDD Kit-B4
Voice
Guidance
PCB
Expansion Bus-F1/F2
Serial Interface Kit-K1
Copy Control Interface Kit-A1
Additional Memory
Wireless LAN Board-B1/B2
Type B (512MB)
IIPSec Board-B2
HDD Mirroring Kit-E1
HDD Data Encryption & Mirroring Kit-C2
Super G3 3rd/4th Line Fax Board-AE1
1 Product Overview > Product Lineup > Function Expansion System Options > Required Options and Conditions
Utility Tray-A1/A2
Multimedia Reader/
Writer-A1
Mobile Connection Kit-A1
USB Device Port-A1
Licence option
imagePASS-U1
Data Analyzer Board-A1
Super G3 FAX Board-AF1
Super G3 2nd Line Fax Board-AF1
● Hardware Products
Product name (Japan)
Utility Tray-A1/A2
Card Reader-C1/F1
Copy Card Reader Installation Kit-A2
Upright Control Panel-A1
Control Panel Sheet-B1
Super G3 FAX Board-AF1
Super G3 2nd Line Fax Board-AF1
Super G3 3rd/4th Line Fax Board-AE1
Handset-G2
imagePASS-U1
Voice Guidance Kit-F1
USB Device Port-A1
Expansion Memory Type B (512 MB)
Wireless LAN Board-B1/B2
Option HDD (2.5 inch/80 GB)-C1
F-1-4 Option HDD (2.5 inch/250 GB)-D1
HDD Mirroring Kit-E1
HDD Data Encryption/Mirroring Kit-C2
Removable HDD Kit-B4
PCI Bus Expansion Kit-F1/F2
Required options, conditions, etc.
Using with Handset-G2 is not available.
No particular options and conditions are required.
Copy Card Reader Installation Kit-A2 is required.
Using with Serial Interface Kit-K1 and Control Interface
Kit-A1 is not available.
Required when Card Reader-C1 is installed.
Control Panel Sheet-B1 is required.
Required when Upright Control Panel-A1 is installed.
No particular options and conditions are required.
Super G3 FAX Board-AF1 or Super G3 additional kit is
required.
Super G3 FAX Board-AF1 is required.
Other than CEL, CCN
Super G3 FAX Board-AF1 and Super G3 2nd Line Fax
Board-AF1 is required.
Using with Utility Tray-A1/A2 is not available.
CMJ only
No particular options and conditions are required.
Other than CMJ, CCN
Product configuration consists of Voice Guidance PCB
and Voice Guidance Unit.
No particular options and conditions are required.
Other than CMJ, CCN, CKBS
The product consists of USB 2 Port HUB PCB only.
No particular options and conditions are required.
CEL is standard
Required when 600 dpi color scanning (mode) is used.
No particular options and conditions are required.
Other than CMJ, CCN, CKBS, TAIWAN
This is used when the mirroring function is used with
HDD Mirroring Kit-E1 or HDD Data Encryption & Mirroring
Kit-C2.
No particular options and conditions are required.
This is used when the mirroring function is used with
HDD Mirroring Kit-E1 or HDD Data Encryption & Mirroring
Kit-C2.
No particular options and conditions are required.
Option HDD (2.5 inch/80 GB)-C1 or Option HDD (2.5
inch/250 GB)-D1 are required.
When performing mirroring, either the Option HDD (80GB)
or the Option HDD (250GB) is required.
Other than CCN
No particular options and conditions are required.
Required when IPSec Security Board-B2/Wireless LAN
Board-B1 is installed.
1-5
1-5