Removing The Fixing Pressure Roller / Fixing Pressure Roller Shaft Support - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

11. Free the harness [1] from the Harness Guide [2] and remove the Fixing Film Unit [3].
CAUTION:
When installing the Fixing Film Unit [1], be sure to align the grooves on the right and left with the rail [3].
[2]
NOTE:
When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.
• COPIER > COUNTER > DRBL-1 > FX-UP-FR
It is also cleared at the same time when FX-UNIT is cleared.
Removing the Fixing Pressure Roller / Fixing Pressure Roller Shaft
Support
■ Preparation
1. Remove the Fixing Unit."Removing the Fixing Unit" on page 242
2. Remove the Fixing Film
1x
[3]
Unit."Removing the Fixing Film Unit" on page 242
4. Parts Replacement and Cleaning
[3]
[1]
[3]
[1]
246
[2]
[2]