Limit:target:insert <Character_Data - Keysight 8990B Programming Manual

14 LIMIT Subsystem
LIMIT:TARGet:INSert <character_data>
This command sets the test target for the limit test.
Syntax
LIMIT
Parameter
Item
character_data
Example
LIMIT:TARG:INS CHAN1
Remarks
– When no mask source has been defined, the following error — -221,"Settings
– When a test target with a unit differing from that of the mask source is
418
:TARG
Description/Defaul t
Sets the source as:
– CHANnel<n>
– WMEMory<n>
– FUNCtion{1|2|3|4}
where n = 1, 2, 3, or 4
conflict;Please assign limit test source first." — will occur.
inserted, the following error — -221,"Settings conflict;Limit test can be
performed only when target unit is the same as mask source unit. Target is not
inserted." — will occur.
Space
:INS
This command sets the test target to CHAN1.
Keysight 8990B Programming Guide
character_data
Range of values
CHANnel<n>
WMEMory<n>
FUNCtion{1|2|3|4}