Procedure To Execute The Factory Recovery (Hdd Revision: Cn924 Or Below) - Keysight E5071C ENA Service Manual

System Recovery
System Recovery
Procedure to execute the factory recovery (HDD Revision: CN924 or
below)
This section describes how to return the contents of the C drive to the factory
state.
You need a keyboard for this operation.
Step 1. Shut down the E5071C.
Step 2. Disconnect all of the USB device from the USB ports.
Step 3. Connect the keyboard to the E5071C.
Step 4. Press the standby switch of the E5071C to turn it on.
Step 5. When the screen as shown in the figure below appears, press
keyboard.
Starting Acronis Loader...
Press F11 for Acronis Startup Recovery Manager...
e5071cse1055
Press F11 only once. If you press F11 twice or more and a screen which is
not mentioned in this manual appears, reboot the instrument and restart
the process from the first.
After several seconds, the next screen appears automatically even if you
do not press any key, so do not miss it.
After Step
off and remove unnecessary USB devices. Then, replace the keyboard with
a PS/2 keyboard to execute the process again.
Step 6. Select Restore.
Keysight E5071C Service Manual
5, if the E5071C freezes with the cursor does not blink, turn the
of the
F11
-303