Demodulating Am, Fm, Φm, Fm Stereo/Rds Signals; The Following Topics Can Be Found In This Section - Keysight X-Series Measurement Manual

Keysight X-Series Signal Analyzer
N9063C Analog Demod Measurement Application
Measurement Guide
1 Demodulating AM, FM, ΦM, FM Stereo/RDS Signals
The Analog Demod measurement application provides the capability of
demodulating AM (amplitude modulated), FM (frequency modulated), ΦM
(phase modulated), and FM Stereo/RDS (Radio Data System) signals. These
measurements provide functionalities that can generally be categorized as
follows:
— Demodulating a modulated carrier and playing the modulating signal over a
— Displaying demodulated signals in both time and frequency domains
— Displaying modulation metrics
— Displaying the RDS information in FM Stereo/RDS signals

The following topics can be found in this section:

speaker (sometimes referred to as tune and listen)
"Setting Up and Making a Measurement" on page 8
"Demodulating an AM Signal" on page 9
"Demodulating an FM Signal" on page 11
"Demodulating an FM Stereo/RDS Signal" on page 13
7