Pulse Timing Diagram; Marker Settings; Amplitude Markers - Keysight N9923A FieldFox User Manual

 Trig Level = -10 dBm, Trig Type (Int), Pos Slope (/), Delay

Pulse Timing Diagram

Marker Settings

Markers are not allowed with Meter-style measurements.
Markers are displayed on Tr 1 and also on the zoom trace if the marker is within the
zoom window time span.
Up to six standard markers can be used to provide readouts of the Y-axis amplitude
at the current X-axis location.
The six standard markers can also be used as Delta Markers.
Learn more about standard markers on page 110.

Amplitude Markers

Amplitude markers are horizontal dotted lines that you can move to any amplitude
level on the screen. The two amplitude markers can be set independently or used as
a pair of delta markers.
Amplitude markers can be used as a visually comparison aid with the pulse
measurement traces.
How to make Amplitude Marker settings
 Press Marker
 Then
More
 Then
Ampl Markers
98 FieldFox User's Guide